Tough Not Toxic

Trade Strip Textured Coatings Remover

Minimal VOC content; 0.000004%

The original and the best! Other hazardous products try to copy us by making it the same colour! Dont be fooled!

 

This product allows the safe removal of textured coatings such as Artex® and Polytex® without causing dust from harmful fibres. In the United Kingdom, some plaster-type textured coatings (mainly sold before the mid-1980's) may contain harmful asbestos fibres. Under no circumstances, sand or chip off, or otherwise disturb, the coating, as this may release asbestos fibres.

 

List of products it will safely remove

  • Bonded textured coatings
  • Non-bonded textured coatings
  • Painted wallpapers
  • Textured paints

 

List of suitable substrates:

  • Bonded textured coatings
  • Non-bonded textured coatings Painted wallpapers
  • Textured paints

 

Product Features

  • Water-based
  • Non-hazardous
  • Non-caustic
  • pH-neutral
  • Solvent-free
  • Non-flammable
  • Non-combustible
  • Minimal evaporation.
  • Clings 100% to vertical surfaces - no drips or runs, hence no waste.
  • Economical to use - independent tests have shown that on average Trade Strip goes up to three times as far as dangerous solvent-based strippers
  • Minimal VOC content; 0.000004%, as certified by an independent laboratory, following a flame ionisation detection test.
  • Does not give off fumes - no need for ventilation and no need to work outside
  • Suitable for use by and near people with respiratory problems, such as asthma sufferers.
  • Non-irritant - does not cause skin burns - safe to use around children and pets
  • Wet working system - keeps working for you while wet. If appropriate, re-wet if the product dries out. When working on plasterboard / sheetrock, careful timing required to ensure the plasterboard/ sheetrock substrate is not softened..

 

 

Matrial safety data sheets on this product available on request: